XTOOL D9 Full System Diagnostic Tool Key Programmer Coding Topology DOIP+CANFD

  

XTOOL D9 Full System Diagnostic Tool Key Programmer Coding Topology DOIP+CANFD. New added Prog-rammable Mo-dule Installation(PMI) function.

When you replace or initialize a new/used mo-dule on Ford/Lincoln/Mazda, XTOOL D9 allows you to copy the data from the original mo-dule and install it to the new unit to finish the mo-dule re-placement. (Available on Software package Ford V14.30, Mazda V12.90 and above). XTOOL D9 is an OE-level full diagnostic scanner as it can scan in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a Dealership- Level only diagnosis, getting the accurate and in-depth results across all automotive systems.

Smart AutoVin & Auto Scan+BT Connection+Cable Connection. XTOOL D9 provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the D9 to communicate with the vehicle through BT connection, providing you with higher mobility.

Use AutoVin to automatically read the vehicle identification number, or access the OBDII menu to use Auto Scan to perform a comprehensive scan of all available modules to shorten the diagnosis time. XTOOL D9 With car service tool is designed for mechanics and workshop, garages. Along with the standard service functions like Oil Reset, EPB, SAS Adjustment, D-P-F Regeneration, Throttle Relearn and Injector Coding, IMMO, ABS Bleeding, TPMS Reset, BMS Reset, etc.

Note: Service functions does not work on all vehicles. XTOOL D9 is a bi-directional scan tool with codding, allows you to receive information to and from the vehicle's onboard computer and can send commands to the vehicle to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That's helpful for DIY mechanics, speeding up the troubleshooting process when it's time to make repairs. New added Pro-grammable Module Ins-tallation function. When you replace or initialize a new/used module on Ford/Lincoln/Mazda, XTOOL D9 allows you to copy the data from the original module and install it to the new unit to finish the re-placement. 85+ Brands, 10000+ Cars Coverage & 14 Languages. XTOOL D9 car diagnostic scanner can work on more than 85+ US domestic, European, and Asian makes and models, more than 10000 cars, the extensive vehicle coverage can provide you with almost every diagnostic option a mechanic could need. With a multilingual menu, you can easily switch between languages, allowing mechanics to avoid language barriers and focus on their vehicle data.

Functions the D9 can works for the Doip protocol and CAN FD. CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits). The screen size of XTOOL D9 (9.7 inches) based on Andoird 10.0 is larger. One screen can display 15 data stream (Graphic and textual), which is easy to navigate.

0000mAh rechargeable battery (up to 20 hours or more of battery life) to avoid frequent charging. 2GB+128GB ROM storage to save more vehicle documents and customer data.

CPU processor updated been 1.8GHz eight-core to perform diagnostics quickly and efficiently. Advanced Coding for Personalize Car Settings & Enhance Vehicle Performance. XTOOL D9 Coding Tool comes with advanced Coding capabilities to customize car settings through flash hidden functions and disable annoying functions, to reprogram the adaptive data for certain components after replacement to enhance vehicle performance. Full Bi-Directional Control & Various Active Tests as You Command. Fuel Pump Enable, Fuel Trim Enable.

A/C Compressor Clutch Relay On/Off. EVAP Purge Solenoid Valve, EVAP Vent Solenoid Valve, EVAP Purge/Seal, EVAP Service Bay Test.

XTOOL D9 automotive diagnostic computer is capable of in-depth OE level diagnostics that is previously available to dealer-tool only. D8 can access and scan all available vehicle modules like. ABS, SRS(Airbag), TCM, PCM, BCM, IMMO, Chassis, Suspension, parking brake system, HVAC, lighting system, Radio systems.

And etc to pinpoint fault locations for efficient car repair or component replacement, turn off warning lights and reset monitors. Read & clear codes, show DTC definitions.

Turn off Check Engine Light(MIL), ABS/Airbag/Transmission warning lights, reset monitors. Show live data stream in text or graph like. Misfire data, engine rpm, transmission oil temperature, mass airflow sensor data, long/short fuel trim, fuel pressure, actual fuel temperature vs desired fuel temperature, cylinder balance rates. To show the parameters when a DTC is recorded. EVAP test, idle relearn, injector test, ABS motor pump cycling, car window, doors, sunroof, wipers tests.

Work with EEPROM Adapter (Package NOT Included) to read/write/backup the IMMO data. Oil Reset: Perform reset for a new countdown of engine oil life system once changed the oil.

EPB Reset: Reset brake pads to maintain the electronic braking system safely and effectively. SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor. Clear the blockage via the continuous burning of the particulate matter captured in the filter. BMS Reset: Register the newly replaced car battery into the car computer.

Gearbox Match: Matching the gearbox/transmission after replacement. ABS Bleed: Bleed the air out of the ABS system for firm brake pedals. Key Programming: Add new keys, disable lost keys, remote learning. Injector Coding: Code the new injectors after replacement for accurate fuel injecting control and improve fuel efficiency. Throttle Relearn, Suspension Calibration, Trans Adaptation(Gearbox Match), TPMS Reset, ABS Initialization, Seat Calibrations, Zero Point Calibration(of yaw rate sensor/seat weight sensor, etc), Window/Door/Sunroof, Headlight Adjustment, Airbag Reset(airbag reset and clear airbag crash data), Idle Relearn, Power Balance, Transport Mode, Tire Upgrade, Tooth Learning, VGT Learn(VGT Turbo Calibration), Fuel Trim Reset, Fuel Alcohol Composition Reset, Air/Fuel Reset, Start/Stop Reset, Language Change. Note: Special Functions vary across vehicle makes, models, year. Intelligent Topology Module Mapping Capability. >> Intuitive display the relationship between vehicle systems to provide a more efficient method for today's complex in-vehicle communications, providing you with a clear view of your vehicle systems/modules and their working status. We'll offer you help, we won't let our buyers suffer any loss. But damage also happens in transit sometimes. This is something we can not control in some cases. We won't let our buyers suffer any loss.

Business time: GMT8 (9:00-18:00) from Monday to Friday. If you don't like the item and want to return it. We are eager to be your professional partner of automobile diagnostic tool. We support remote assistance if you have any difficulty in software installation.