New Key Full

LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool


LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool
LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool
LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool

LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool   LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool

LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool. Work with X-431 series diagnostic scanners, like X431 Pros V.

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement. LAUNCH X431 PRO 5 2022 New Global Ver.

2022 New Arrivals - The genuine X431 diagnostic scanner officially authorized from LAUNCH; No IP restrictions; Extra-long 2 years software updates at no costs; Extended 5 years quality backup. Upgraded from LAUNCH X431 V+/PRO3/PROS/TURBO/Throttle - A rich array of future-proof functions for productive works: 1 SmartBox 3.0, J2534 Programming, Intelligent AutoVIN & AutoScan, Active Tests, All System Diagnostics, VAG Guided Function, FCA AutoAuth Access, etc. 2 advanced Online Coding & Adaptations brings more personal settings; 3 50+ service functions with more frequent updates to support more vehicles.

LAUNCH X431 SmartBox 3.0 - 1 Fix the most vehicles' problems with broad vehicle coverage; meet SAE standards for J2534-1 & -2, CANFD, DOIP and support DC9-36V for HD Vehicles; 2 also serves as a wireless VCI. Intelligent Diagnostics - AutoVIN & AutoScan accelerates all-systems DTC scans that clock in at an average of.

Send Commands with Bi-directional Controls - Effectively test car components on demand. FCA AutoAuth Access - Bypass SGM in FCA vehicles seamlessly and within seconds; works on 2017 and later Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc. VAG Guided Function - Skip the routine procedure of entering the security access code & channel number for VW, Audi, Skoda, Seat vehicles. Add Modules to Expand Features - ADAS Calibration Toolkit; VSP-600 VideoScope; X431 TPMS TSGUN; BST360 Bluetooth Battery Tester; X-PROG & X-PROG3 Immobilizer. Non-16pin Connectors & Cables Kit - enable to work on varied vehicles across the world.

4 streams can be merged; 25 languages menu. Great Combination - Android 9.0 OS, 8-core 1.8GHz processor, 4GB RAM & 64GB ROM (128G expandable), 10.1 HD 19201200 touchscreen, 8MP rear & 5MP front camera, 7000 mAh battery, etc.

SmartBox 3.0: Easy to Manage Wider Vehicles. The optimization to the LAUNCH X431 scan tool's software communication with the vehicles of today and of the future, dramatically improves scanning, coding, and reprogramming performance.

Serve as J2534-Compliant VCI - Support J2534 protocol, compatible with Toyota, Honda, Volvo, VW, GM, Chrysler, Benz, Jaguar, Land Rover; offering cost-effective access to data and OE programming downloads from vehicle manufacturers. Serve as the VCI Box for Wireless Diagnostics - Transmit vehicle data to the diagnostic tablet without a physical connection. How to Use SmartBox 3.0 as a J2534 Tool? Download the OEM software in Automakers' Service Webs to your computer. You can reach us to get web sites.

Connect the SmartBox 3.0 to your computer with the included USB cable, or via the stable and solid 5G Wi-Fi network. Connect the SmartBox 3.0 to your vehicle's DLC port with/without the included extended OBDII cable. Download and install the drivers for SmartBox 3.0 at the LAUNCH official site. Run "SmartBox Tool 3.0" and there you go. Coding: Change Preprogrammed Car Settings.

Reprogram the adaptive data for newly-installed module after repair or replacement. Fix issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, and Durability of mechanical parts.

Activate higher-level car functions, like making the pointer move and perform self check etc. Disable the unneed car functions such as the Automatic Start/Stop etc. Online Coding is compatible with Volkswagen, Audi, BMW, Porsche, etc. Applications: Deactivating the Start/Stop function. Closing the windows after closing the car door with the key.

Flashing the brake lights during emergency braking. Changing the brightness of daytime running lights. 50+ Hot Reset & Relearn Maintenance Services.

You can easily choose multiple commonly-used service functions, follow their clear and precise instructions to complete complex projects much faster, including but not limited to the following. Oil Maintenance Light Reset: reset the oil service lamp; re-calculate the optimal oil life change interval. Steering Angle Reset: reset the steering angle to zero to keep the car running straight. Injector Coding: write the new injector code into the system to correct cylinder injection quantity. Electronic Parking Brake Reset: help replace and reset the brake pad.

ABS Bleeding: help exhaust the air in ABS system in an easy way. Throttle Matching: initialize the throttle actuators to the default state. Battery Matching: register the battery after replacement. DPF Regeneration: help remove the particulate matter to keep the trap stable. Tire Pressure Reset: reset the tire pressure.

Suspension Level Calibration: adjust the vehicle body height sensor for level calibration. Headlight Matching: initialize the adaptive headlamp system. And many more with expanding. Reach us for compatibility check. NOTE: Explore more service functions by accessing menus of "Vehicle Brand -> System Diagnostics -> Special Function". This X431 scan tool also features bi-directional control to perform specific tests and functions without using the vehicle's own controls to save time. For example: using the diagnostic tool to command the fuel pump on. If the fuel pressure gauge shows proper fuel pressure, you'd know the fuel pump circuit and pump are functioning properly. This intelligent scanner will automatically identify the make, model, and manufacture year in one touch; help you match the right software so the diagnosis will be carried out fast and efficiently. You will also enjoy how smart it would be to record the test results as Inspection Report, being done by itself, letting you maintain vehicle health logs and share the information easily. See what your car is doing in real time; get car performance, sensor data and more at one glance! This diagnostic tool presents the live data stream in 3 modes: a. Numbers and lists (default); b. 12 channels in one screen; c. 4 data can be merged for you to quickly identify if the data are in normal conditions, ranges or not. Take Your Guesswork Out: Diagnostic Feedback. Any wonder about what specific diagnostic issues you may challenge? This scan tool thoughtfully offers direct access to the "Diagnostic Feedback" function module, which provides customized repair suggestions from LAUNCH's certified professionals. This is invaluable to workshops attempting to fix issues of new car models that have only been on the market for a short time. This diagnostic tool comes programmed in 25 languages: Chinese (SC/TC), English, Japanese, Korean, French, Spanish, Portuguese, Italian, Russian, German, Polish, Romanian, Dutch, Arabic, Czech, Danish, Greek, Persian, Finnish, Hungarian, Swedish, Turkish, Serbian, and Croatian.

Easy switch steps: go to "Setting" -> select the language -> go to "Upgrade" -> download & install the car software pack translated in the selected language. 32GB (expandable up to 128GB). 5MP Front camera + 8MP Rear camera. Launch X-Prog 3 Advanced Immobilizer & Key Programmer. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.

Supported brands: for AUDI, for SKODA, for SEAT, for BMW, for MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII.

Reads & writes most Engine/Gearbox E Us without disassembling the shell. Supports for AUDI MQB platform engine E U replacement or cloning (Read engine E U data directly from the key). Supports for AUDI MQB platform gearbox E U replacement or cloning.

Supports E U replacement for the fifth-generation of Audi (0AW/0B5) gearbox. Supports reading, writing & cloning the E U for the fourth-generation of V---W UDS engine. Supports BMW E chassis 8HP gearbox E U reprogramming to empty. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine E U). Integrated the functions of key matching/copy, anti-theft IC reading & writing, and E U reading & writing, etc.

Supports common E U/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating. Supports E U replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC). Supports E U replacement for the fourth-generation of for V---W/AUDI engine; 5. Supports E U replacement for the fifth-generation of for V--W/AUDI Bosch and Siemens engines.

Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E U, and KESSY IC. Supports the for BMW F and G chassis 8HP gearbox E U reprogramming to empty. Supports the for BMW CAS4/CAS4+ module replacement. Supports the E U cloning and replacement for BMW Siemens engines.

Erase the password for Mercedes-Benz engine and gearbox within 3S. Add the function of calculating the password for the for Mercedes-Benz key within 1 minute. Launch X-Prog 3 Supported Chip Brands. It supports common mainstream E U MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated. Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Connection method 3: After removing the E U from the car, connect the anti-theft E U pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft E U and the diagnostic host. Q1: If the X-PROG 3 can reset the ELV (electric steering column lock) on the Mercedes W169? A1: Yes, it supported Q2: Does Xprog3 support immo program A2: Yes, it does Q3: Whether X-431 PRO V7.0 can work with X-Prog 3? A3: No, it can not, it need work with X431 V 8inch and above X431 Scanner.

Otherwise an Unpaid Item case will be opened to you. We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse.

12 months free repair for the devices. 3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics.

For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.

This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "diag-master" and is located in this country: US. This item can be shipped to United States.
  1. Model: X431 Pro 5 & X-PROG3
  2. Brand: LAUNCH
  3. Manufacturer Part Number: X431 PRO5 PAD VII V PRO 4.0 PRO3S+ V+ Pro Mini
  4. OBD Interface: CAN, EOBD, OBD, OBDII
  5. Connectivity: Bluetooth
  6. Supported System: ABS, DPF, EPB, SAS, SRS, TPMS, Engine, Transmission
  7. Vehicle Type: Passenger Vehicle
  8. Features: Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
  9. Warranty: 5 Year
  10. Software Update: 2 Years Free Update
  11. Operating system: Android 9.0
  12. Display: 10.1” HD 1920*1200 touchscreen
  13. CPU: 1.8GHz Octa-core
  14. Storage: 4GB RAM & 64GB ROM (128G expandable)
  15. Camera: 5MP Front camera + 8MP Rear camera
  16. WiFi: 2.4GHz/5GHz (dual frequency)
  17. Battery: 7000 mAh
  18. New protocol support: J2534, CANFD, DOIP
  19. Feature 1: Full Bidirectional Active Test
  20. Feature 2: FCA AutoAuth Access
  21. Feature 3: J2534 Programming Online Coding
  22. Feature 4: Intelligent Diagnostics
  23. Feature 5: Guided function for VW and Audi
  24. Feature 6: Non-16pin Connectors & Cables Kit
  25. Feature 7: Support ADAS calibration
  26. Feature 8: One-click Update Online via Wi-Fi
  27. Feature 9: Global Version No IP Limited
  28. Feature 10: Extended Trucks Diagnostic Functions
  29. \uD83D\uDD25Extended function 1: VideoScope (with VSP-600)
  30. \uD83D\uDD25Extended function 2: Full TPMS functions (with X431 TSGUN)
  31. \uD83D\uDD25Extended function 3: Bluetooth Battery Tester (with BST360)
  32. \uD83D\uDD25Extended function 4: Immobilizer Key Programmer (with X-PROG3)
  33. Similar Items: LAUNCH X431 V+ PAD VII PAD III PRO3S+ V PRO

LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool   LAUNCH X431 PRO5 & X-PROG3 Car OBD2 Diagnostic Scanner IMMO Key Programming Tool