OE Level All Systems Diagnostics:Complete capabilities for codes, live data, freeze frame, active tests, matchings, adaptations, information and etc. Powerful OE level diagnostics for more than 80 US, Asian and European makes and models. KINGBOLEN Scanner K7 Auto Full Diagnostic Bi-Directional Test Key Programming. New Arrival KINGBOLEN K7 HD Display 7 inch Tablet Car All System Diagnostic Tool ECU Coding, Active Test, 30+ Reset, 3 Year All software Free Update. Complete capabilities for read & clean codes, live data, active test, information, adaptation, matching, etc.
Powerful combination Bi-directional Control/OE-Level All Systems Diagnostics/Advanced maintenance services. 7-inch LED capacitive touch screen with 1024×600 resolution. Microphone, dual speakers, 4-band 3.5mm stereo/standard headset jack. Internal reliable 32GB On-board Memory.
Dual Wi-Fi to access your favorite web resources faster. What are the advantages of K7 over other diagnostic tools at the same price? All System, 28 Resets, Active Test, ECU Coding? Meet your needs for car diagnostics.
All Software 3 year free update? Larger screen and clearer display.English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Hungarian, Persian, Greek, Slovak, Dutch, Swedish, Traditional Chinese 5. Runs smoothly without lagging 6. 28 commonly used Reset functions to meet your needs? OE-level ALL System Diagnostic 3 Years Free Update. As an OE-level automotive diagnostic tool, KINGBOLEN K7 can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information and perform active tests, matching, adaptation, turn off warning lights, reset monitors. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Include: ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS System, DPF System, Air Conditioning System, Transmission System, etc... Brief introduction of its capabilities in full systems diagnostic as follows: 1. Diagnostic tool XTOOL D7 can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission. It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing. Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status. If you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation; 6. If the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined; 7.
If vehicle won't start or "Check Engine" light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions; 8. If your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car; 9.If you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can't see clearly; 10:? If you see rapid signal blinking or dimming lights. 17 Languages can be switched at will.
English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Hungarian, Persian, Dutch, Greek, Slovak, Swedish, Traditional Chinese. ECU Coding 3 Years Free Update.
Used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements. You can use KINGBOLEN K7 to stimulate all the possibilities of the vehicles After we replace control units, bad actuators, or certain parts we need to do the coding to make the replaced parts being stored and recognized by the ECU. Almost all systems that include engine, fuel, injector, gear shift, ABS, airbag system, and so on can be coded with this scanner. Before the coding, please read and record the original module's information. Recode Changed Modules/ Optimize Vehicle Performance/ Re-Flash/ Hidden Functions/ Renew ECUs Coordination/ Reprogram/ Adaptive Data/ Improve Fuel Efficiency/ Reduce Power Loss/ Improve the Durability of Mechanical Parts.Active Test (BI-Directional Control) 3 Years Free Update. KINGBOLEN K7 car scanner diagnostic tool Features Full bi-directional control ability, to send commands to vehicle's systems/components, to verify system input/output without using the vehicle's controls, e. Turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior & exterior lights, sound horn, test door lock actuators and such.
KINGBOLEN K7 with 28+ Services & Reset Functions which allows you to reset various systems in your vehicle. Support more function than other scanners priced similarly (keep updating). The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the mileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.
By doing these, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjust the intake volume. SAS Resets- Steering Angle Reset. To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle. This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity.
Lf the ABS computer, ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires.Lf gear learning is not performed for a car equipped with Delphi engine, the MlL turns on after the engine is started. The diagnostic device detects the DTC P1336'gear not learned'.
In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC'gear not learned is present, gear learning must be performed. To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.When the ignition switch key, ignition switch, combined instrument panel, ECu, BCM, or remote control battery is replaced, anti-theft key matching must be performed. Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection. After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL. Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, and tire is replaced for the car with tire pressure monitoring function.
This function can adjust the height of the body. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration. This feature is used to initialize the adaptive headlamp system.
According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture. This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc. This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
A ODo reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. B Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance. This function resets the airbag data to clear the airbag collision fault indicator.
When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable, it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and theairbag computer can continue to use. Ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.This function is applied to set or learn Air/Fuel ratio parameters. This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided that the vehicle has a hidden function and supported by hardware). NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. Lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECu. AdBlue Reset (Diesel Engine Exhaust Gas Filter). After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required. This function is applied to match the seats with memory function that are replaced and repaired. Use this function to activate the electronic water pump before venting the cooling system. This function is used to set the size parameters of the modified or replaced tire. This feature is designed to perform door window matching to recover ECU initial memory, and recover theautomatic ascending and descending function of power window. This function is used to change the system language of the vehicle central control panel. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs) 2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. 4 I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability. 3 Years Free upgrade and lifetime technical service.
1 7 inch K7 Tablet 1 Dongle 1 Handbag black 1 Multilingual manual (English, French, Spanish, German, Russian, Italian, Portuguese, Polish, Japanese) 1 carton box 3 Other Accessories. Otherwise an Unpaid Item case will be opened to you.12 Months free repair for the devices. 3 Months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim.
We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of LAUNCH, THINKCAR, EDIAG and KINGBOLEN etc. And more brands will be show in our store in near future.