Fits 1997-2004 Ford F-150 F150 4WD 3 Front + 2 Rear Full Lift Leveling Kit

  

Our Steel Torsion Key Lift that's TWICE as strong as your factory keys for up to 3 of lift. Re-indexed to ensure a factory quality ride. Made specific for each vehicle unlike mass produced torsion keys that sellers pass off as universal. Installation takes as little as 2 hours and can completed by any backyard mechanic.

Once installed, your factory adjuster bolt can be used to set your desired ride height from 1"-3". DO I NEED ANY SPECIAL TOOLS FOR INSTALLATION? Yes, in order to install this kit on your application, you must use a Torsion Key Unloader/Puller. This is very similar to a gear puller which you can rent at any auto specialist store.

We recommend either a 5 or 7 ton puller for this job. HOW DO I ADJUST MY TRUCK FROM 1-3 AS STATED IN YOUR AD? Your factory adjuster bolt will allow you to personalize your front lift in order to put your truck up an exact amount. Our kit will give you about 2" of lift after installation, using the adjuster bolt, every full turn in either direction will increase or decrease your ride height 1/8".

The best way to find out which kit you need is to measure from the ground to the top center of your wheel well in the front and in the rear. Subtract the two numbers and that is the amount you need in order to level your truck. Heavy Metal reserves the right to make changes to the material, design, and specifications of the replacement item without prior notice. The item "Fits 1997-2004 Ford F-150 F150 4WD 3 Front + 2 Rear Full Lift Leveling Kit" is in sale since Wednesday, August 7, 2019.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "heavymetal-suspensions" and is located in La Mirada, California. This item can be shipped worldwide.

1. U bolt Specs: Round 10.75" Length 3.25" Width 3.92" Thread 9/16"
2. Color: Black
3. Finish: Corrosion Resistant Finish
4. Compatibility: FORD F150
5. Lift Height: 3" Front 2" Rear
6. Interchange Part Number: 60470 Steel Adjustable Torsion Keys Blocks U-Bolts
7. Adjustable: Yes
8. Manufacturer Part Number: 60470
9. Part Type: Suspension Lift Kit
10. Included Hardware: Mounting Hardware
11. Placement on Vehicle: Left
12. Other Part Number: 60470 Three Inch Hardware 4X4 Lifting Level
13. Brand: Heavy Metal Suspensions
14. Fitment Type: Performance/Custom
15. Non-Domestic Product: No
16. Drivetrain: 4WD 4x4
17. Installation: Easy / DIY Instructions
18. Material: Carbon Steel
19. Key Specs: Adjustable 1" - 3" Lift Height
20. Blocks Specs: 9/16Th Pin, 5.8" Long x 2.5" Wide Blocks