Autel MaxiIM IM508 IMMO Key Programming Tool Auto Diagnostic Full System Scanner

Autel MaxiIM IM508 IMMO Key Programming Tool Auto Diagnostic Full System Scanner. Autel MaxiIM IM508 2023 2 Years Free Update Key Fob Programming Tool with XP200 Programmer IMMO Tool Car Scanner 28+Service OE All System Diagnostic Active Test Lite of IM608 Pro Advanced KM100. IM508 has NO IP lock, it can use in any area!! IM508+xp400pro has same IMMO funtions as IM608, Only the difference in hardware, im508+xp400pro cheaper more than im608 1000+ dollars, i think is perfect choose for you!! Autel IM508 is compatible with Autel XP400 Pro Key Programmer. When connected to XP400 Pro, IM508 would have the same IMMO key programming functions as Autel IM608 Pro to further extends its capability to support IMMO functions for BMW CAS4 Key Learning and programming functions like IMMO ECU Read & Write, MC9S12 Encryption Chip Read & Write, IC Card Read & Write, for Mercedes Infrared Key Read & Write, Remote Frequency Detect and it will support PC connection. Key Fob Programmer and IMMO Tool MaxiIM IM508.

MaxiIM IM508 is a fast, easy-to-use, and ultraportable immobilizer and key programming device. The Android-based touchscreen tablet features powerful quad-core processor, intuitive design and straight-forward interface. Equipped with the XP200 key programmer, IM508 is capable of providing extraordinary service functions for the immobilizer system. Together with the ability to quickly diagnose all modules of the majority of makes and models on the market, IM508 provides you with superior special functions. IM508 is the perfect solution for shops and technicians who demand affordable and powerful IMMO and diagnostic services.

Android Operating System for fast boot-up and multitasking. Smart Mode for guided and automated key learning. Expert Mode for advanced key learning. Read PIN/CS (all key lost), key generation, key learning, remote learning. Powerful OE level diagnostics for more than 80 US, Asian and European makes and models. Advanced maintenance services including EPB, SAS, Oil reset, BMS and TPMS sensor ID relearn. Support "Auto Auth" gateway for FCA 2018 and newer cars. Support active test and complete special functions. IMMO & Key Programming with Auto VIN Scan. The MaxiIM diagnostic system features the latest VIN-based Auto VIN Scan function to identify vehicles and it is applied to IMMO, Programming, Diagnostic and Service applications. IMMO provides two modes: Smart Mode and Expert Mode, and only Smart Mode can be accessed by using Auto VIN function. The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBDII connection. The application retrieves vehicle IMMO information and performs IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. EEPROM and MCU are the anti-theft chips that store the anti-theft data of the vehicles. With XP200 Key Programmer, the Autel IM508 key programming tool can read EEPROM/MCU data or write the anti-theft data to the EEPROM/MCU.

EEPROM/MCU Read & EEPROM/MCU Write are only available for the high-end key programming tools. The Programming application requires connection between the tablet and the XP200, and no vehicle connection is required.

This application can access the key chip, read, retrieve and write key information, as well as other key related functions. All System Diagnostics Via OBDII. OE level diagnostics for more than 80 US, Asian and European makes and models. The Diagnostics application can retrieve ECU information, read & erase DTCs, view live data, and access the electronic control unit (ECU) for various vehicle control systems, including engine, transmission, antilock brake system (ABS), airbag system (SRS). The Auto Scan function performs a comprehensive scanning over all the ECUs in the vehicle to locate systems' faults and retrieve DTCs. A fast-access option for OBDII/EOBD vehicle diagnosis is available on the Vehicle Menu screen. This option presents a quick way to check for DTCs, isolate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status. The OBD direct access option is also used for testing OBDII/EOBD compliant vehicles that are not included in the Diagnostics database. DTC & FFD: the screen displays a list of Stored Codes and Pending Codes. I/M Readiness: check the readiness of the monitoring system.

Live Data: displays the real time PID data from ECU. O2 Sensor Monitor: allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.

On-Board Monitor: allows you to view the results of On-Board Monitor tests. Component Test: enables bi-directional control of the ECM so that the diagnostic tool is able to transmit control commands to operate the vehicle systems. Vehicle Information: displays the vehicle identification number (VIN), the calibration identification, and the calibration verification number (CVN), and other information of the test vehicle.

Vehicle Status: check the current condition of the vehicle, including communication protocols of OBDII modules, retrieved codes amount, status of the Malfunction Indicator Light (MIL), and other additional information. The Service section is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances.

The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations.

The most commonly performed service functions include. Oil Reset Service: allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required. EPB Service: has a multitude of usages to maintain the electronic braking system safely and effectively.

The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc. BMS Service: allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. SAS Service: perform steering angle sensor calibration and clear records. TPMS Service: quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS replacement and sensor test. The Active Test function is used to access vehicle-specific subsystem and component tests.

During an active test, the tablet sends commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch between two operating states. These functions perform various component adaptations, allowing you to recalibrate or configure certain components after making repairs or replacement. Smart Mode - accesses to a function menu where each function is configured as a smart guide system.

The Smart Mode provides guided functions with step-by-step instructions. Expert Mode - accesses to a function menu where each function is separated from each other. Expert Mode provides skilled technicians a convenient way to perform individual IMMO functions they need.

All the function options in this mode are separated segments. If needed, technicians can only perform one segment function instead of a whole process provided in Smart Mode.

Operating System: Android 4.4.4, KitKat. Processor: Cortex-A9 processor(1.6 GHz). Display: 7-inch LCD capacitive touchscreen with 1024x600 resolution. Connectivity: Mini USB 2.0; USB2.0; Wi-Fi; Micro SD card slot(supports up to 32GB). Power and Battery: 3.7 V/5000 mAh lithium-polymer battery; Charges via 5 VDC power supply.

Tested Battery Life: Around 4.5 hours of continuous use. 7.0 LCD Capacitive Touchscreen.

Ambient Light Sensor - detects ambient brightness. Power LED - indicates battery level & charging or system status. Vehicle Communication LED - flashes green when the Display Tablet is communicating/linking with the vehicle's system. The power LED displays green, yellow or red depending on power level and operating state.

Green: Illuminates green when the Display Tablet is charging and the battery level is above 90%. Illuminates green when the Display Tablet is powered on and the battery level is above 15%. Yellow: Illuminates yellow when the Display Tablet is charging and the battery level is below 90%. Red: Illuminates red when the Display Tablet is powered on and the battery level is below 15%. Back View & Top View.

Collapsible Stand - extends from the back to allow hands-free viewing of the Display Tablet. Micro SD Card Slot - holds the micro SD card. DB15-Pin Port - connects the main cable. Lock/Power Button - turns the device on & off with long press, or locks the screen with short press. Vehicle Key Chip Slot - holds the vehicle key chip.

Vehicle Key Slot - holds the vehicle key. Status LED Light - indicates the current operating status. Connection Port - connects EEPROM Adaptor and EEPROM Clamp Integrated.

USB Port - provides data communication and power supply. 1PC x Carrying Case, 1PC x MaxiIM IM508 Tablet, 1PC x Main Cable. 1PC x XP200 Key Programmer, 1PC x Mazda-17 Adaptor. 1PC x KIA-10 Adaptor, 1PC x KIA-20 Adaptor. 1PC x Honda-3 Adaptor, 1PC x AAC001 - MED17 Cable.

1PC x Mini USB Cable, 1PC x USB External Power Adapter. 1PC x Quick Guide, 1PC x APB001 - EEPROM Adaptor. 1PC x APB002 - 68HC908 Adaptor, 1PC x APA002 - EEPROM Socket.

1PC x APA001 - EEPROM Clamp Integrated MC9S12 Cable. Otherwise an Unpaid Item case will be opened to you. We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse. 12 months free repair for the devices. 3 months for the accessories.

If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics.

For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands.

And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners".

The seller is "diag-master" and is located in this country: US. This item can be shipped to United States.

Brand: Autel
Manufacturer Part Number: IM608 PRO IM508 KM100 Maxisys Ultra Elite MK908P
Model: Autel MaxiIM IM508
Type: All-in-one TOP Key Programming Tool
OBD Interface: OBDII, CAN, EOBD, OBD
Connectivity: USB
Supported System: ABS, DPF, EPB, SAS, SRS, TPMS
Vehicle Type: Passenger Vehicle
Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Warranty: 5 Year
Update: 2 Year Free Update
Operating system: Android 4.4.4
Memory: 64GB
Processor: Rockchip RK3188 Quad core
Display: 7-inch LCD capacitive touchscreen
Battery: 3.7 V/5000 mAh lithium-polymer battery
Power: Charges via 5 VDC power supply
Battery Charging Input: 5V/1.5A
\uD83D\uDC4DFunctions 1: All-In-One Key Fob Programming
\uD83D\uDC4DFunctions 2: Bi-Directional Control/ Active Test
\uD83D\uDC4DFunctions 3: 28+ Maintenance Services
\uD83D\uDC4DFunctions 4: OE-LEVEL ALL System DIAGNOSIS
Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide
UPC: 632096267212