Support English / Portuguese / Germany / Japanese / French / Spanish / Italian/ Dutch/ Polish/ Swedish/ Turkish/ Vietnamese/ Russian/ Korean/ Arabic/ Thai. Please leave the S/N of machine to authorize the language you want after you receive it.IM508 not IP lock, it can use in any area!! IM508+xp400pro has same IMMO funtions as IM608, Only the difference in hardware, im508+xp400pro cheaper more than im608 1000+ dollars, i think is perfect choose for you!!
As a professional diagnostic scan tool, IM508 is capable of performing OE-Level diagnosis on ALL available modules for more than 80 US, Asian and European makes and models and most useful service functions like Oil Reset, Reset Parking Brake Pads after Replacement, SAS Calibration, DPF Regeneration and BMS. With complete capabilities for codes, live data, E/CU Information, adaptation, matching, coding and etc, IM508 becomes the most affordable professional automotive key programming tool for shops and technicians. Autel IM508 Key Programming Tool with XP200 Key Programmer is a professional key programming & OBD2 diagnostic scan tool that combines key programming, all systems diagnostics and hot service functions without breaking your bank.
IM508 is the perfect and cost-effective key FOB programming and diagnostic tool for workshops/ DIYers. Advanced IMMO & Key Programming. IM508 can perform various IMMO functions like Read PIN/CS(All Ky Lost), Key Generation, Key Learning, Remote Learning, for Benz FEM/BDC Key Learning/ECU Adaptation, for BMW CAS3/2 Key Learning, for VW/Audi/Skoda/Seat IMMO III/IV/V Add Key, All Ky Lost, IMMO ECU Reset/Adaptation/Refresh/Coding and programming functions Key Chip Read & Write, EEPROM Read & Write, Transponder Read & Write and basic MCU Read & Write.
Autel MaxiIM IM508 automotive scan tool can quickly diagnose all available modules for more than 80 US, Asian and European car makes and read/erase fault codes, view live data, read ECU information, etc. Up to 2019/2020 and some of 2021.28+ Most Useful Service Functions. As an OBD2 car diagnostic scanner, IM508 has the same diagnostic and service functions as Autel maxicom MK808/ MK808BT/ MX808. Comes with 25+ useful service functions like ABS Autobleed, Oil Reset, DPF Regeneration, Reset Parking Brake Pads after replacement, SAS Calibration, BMS, injector coding and etc. Tap Update icon to update the device's system version to V2.62 or above one and download all available vehicle software.
Note: If there is not enough storage for downloading update, customer can insert a micro SD card to the device. Bi-Directions Control/Active Test and Special Function. Active Test function is used for outputting signal to vehicle control unit using the device to control actuator for test, so that it can test whether the actuator works normally, such as Fuel Pumps test, EGR test, etc.Special Function generally refers to the initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn. How to perform Active test or Specical Function? A Read vehicle by auto detect, manual input or manual selection. B Select Auto scan or Control Unit ----- (Powertrain/Body/Chassis) ---- relevant module---Active test/Special function. C Take steps by following the on-screen instructions. Chrysler, JEEP, Dodge, Fiat are currently supported. Maserati is still in development.
Applies to 2018 and later FCA cars. Smart Mode(Guided And Automated Key Learning). Expert Mode(Advanced Key Learning). Read Pin/cs(All Key Lost). Read Pin/ cs(All Key Lost).
Benz Fem/bdc Key Learing And ECU Adaptation. Vw/audi/skoda/seat Immo li/iv/v Add Key, All Key Lost.NOTE: The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBD II connection. The XP200 is specially designed to read Volkswagen vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the XP200 can read/write key chip data quickly and accurately. XP200, and no vehicle connection is required. This application can access the key chip, read retrieve and write key information. Key Chip Programmnig With XP200 Key Programmer.
With Autel XP200 Key Programmer, IM508 can access the key chip, read, retrieve and write key information, support read PIN/CS (all key lost), key generation, key learning, remote learning, IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, Backup/Restore IMMO Data, BMW FEM/BDC Key Learning and ECU Adaptation, BMW CAS4/3/2 Key Learning, VW/Audi MQB (VDD & JCI) Add Key, IMMO V A4/A5/Q5 2015+ Key Learning, VW/Audi/Skoda/Seat IMMO III/IV/V Add Key, All Key Lost. It has wide vehicle coverage so it can work on Toyota, Honda, Infiniti, Kia, Nissan, Subaru, Suzuki, Mazda, Lexus, Dodge, GM, and so on.
Note: The Programming Application -- requires connection between the tablet and the XP200, no vehicle connection is required. Autel IM508 comes with most useful service functions like Oil Reset, EPB, DPF, SAS, TPMS, BMS, Injector, Throttle, Suspension, Brake Bleed, TEC-learn, Headlamp, WIN_DR_ROOF, Seats, Odomter, Lang_change, CHG_TIRE_SIZE, Airbag_reset, Trans_adaptation, Cylinder, Turbocharging, A/F Setting, etc. Oil Reset: Reset service mileage & service intervals after engine oil is changed. EPB Service: Resetting parking brake pads after replacement and etc.
SAS Calibration: Reset the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. DPF Regeneration: Performs DPF Regeneration to clear the blockage through continuous burning of the particulate matter captured in the.
DPF filter and turn off DPF light. BMS: Register the battery replacement and etc. TPMS Service: Quickly look up the tire sensor IDs from the vehicle's ECU, perform TPMS programming and reset procedures after tire sensors are replaced.
Autel MaxiIM IM508 automotive diagnostic tablet features the latest VIN-based Auto VIN Scan technology to identify vehicles brand, make, model and year at a single touch and it is applied to IMMO, Programming, Diagnostics and Services. Note: Only Smart Mode can be accessed by using Auto VIN Scan.
Autel MaxiIM IM508 Car Key Programming Tool can perform powerful OE level diagnostics for more than 80 US, Asian and European makes and models. IM508 work with Toyota, Honda, Infiniti, Kia, Nissan, Subaru, Suzuki, Mazda, Lexus, Dodge, GM (Buick/Cadillac/Chevrolet/GMC/Pontiac/Saturn), Ford, Lincoln, Fiat, Citroen, Peugeot, Renault, Volvo, BMW, Mini, Volkswagen, Bentley, Seat, Skoda, and more. Operating System: AndroidT 4.4.4, KitKat.
Processor: Cortex-A9 processor(1.6 GHz). Display: 7-inch LCD capacitive touchscreen with 1024x600 resolution.
Connectivity: Mini USB 2.0; USB2.0; Wi-Fi; Micro SD card slot(supports up to 32GB). Sensors: Ambient light sensor for brightness auto changing. Power and Battery: 3.7 V/5000 mAh lithium-polymer battery; Charges via 5 VDC power supply. Tested Battery Life: Around 4.5 hours of continuous use. Battery Charging Input: 5V/1.5A.
Operating Temp: 0 to 50°C (32 to 122°F). Storage Temp: -20 to 60°C (-4 to 140°F). Protocols: ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6. Autel XP400Pro is a replacement for XP400.
It adds more functionality for BM-W, Merc-edes-Be-nz, as well as EEPROM reading. With the new protocols, the end-user will be able to read over 2000 (chips, components, devices) types including EEPROM and MCU Read, additional Odometer Read/Write, and more. Also, added functions for EWS3, W209, NEC, and more. NOTE: Don't connect directly AUTEL XP400 Pro with your car or it will be damaged.
Please always be noted that XP400 Pro can perform IMMO functions only when connected with scanner and adapters such as APA104, APA105 etc. XP400PRO Advanced All-in-One Key Programmer. XP400Pro Key and Chip Programmer Reads/Writes and Learns Keys to the Vehicle. Performs EEPROM-data Functions Needed for European Vehicles.
Enables Programming of Infrared Keys for Mercedes Vehicles and IC Chip Keys on Late Model Hyundai Kia Vehicles. Supports Data Read/Write of 3,000 Plus Chip Types inc. EEPROM, engine ECU, MCU, IMMO ECU.Compatible with the IM508, IM608, IM608Pro, IM100 and IM600. The XP400 Pro has been extended IMMO functionalities on BMW, BENZ and Audi etc.
Designed to work with IM508 to perform various IMMO Key programmings, key chip programming functions, MCU writing and reading, etc. Auto Detect Make, Model, Year, System. Read PIN (All Key Lost), Key Learning, IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding, Remote Learning.
XP400PRO Has Advanced Key Programming Vchicle Coverage. For Benz: - One-tap Key Programming via OBD - 3rd Generation IMMO CAN-Line/ K-Line Add Key, All Key Lost. For BMW: - Smart IMMO Programming (support EWS3/ 4, CAS 1/ 2/ 3/ 4, FEM/ BDC) - Add Key/All Key Lost. For GM: - Read IMMO Password, Add Key/ All Key Lost up to 2020. For Ford: - Add Key/All Key Lost (No PIN Needed) up to 2020.
For Mazda: - Add Key/All Key Lost (No PIN Needed) up to 2020 FCA - Read IMMO Password, Add Key/All Key Lost up to 2020. For Renault: - Add Key/All Key Lost (No PIN Needed) up to 2020.
For Land Rover/Jaguar: - Add Key/All Key Lost up to 2019. For Volvo: - Semi-smart Key Learning via OBD up to 2018 - Smart/Blade/Fobik Key Learning via Dump.
Autel MaxiIM IM508 Package Includes. 1 X MaxiIM IM508 Tablet. 1 X AAC001 - MED17 Cable.
1 X XP200 Key Programmer. 1 X USB External Power Adapter.
1 X Mini USB Cable. 1 x XP400 Pro Main Unite. 1 x APB129 - EEPROM Adapter. 1 x APA002 - EEPROM Socket. 1 x APB125 - Mercedes Infrared Collector.1 x APB103 - MCU_PLCC52 Adapter. 1 x APB104 - MCU_FQFP64 Adapter.
1 x APB105 - MCU_FQFP80 Adapter. 1 x APB106 - MCU_FQFP112 Adapter. 1 x APB107 - MCU_FQFP144 Adapter. 1 x APB108 - MCU_FQFP176 Adapter.1 x APB109 - MCU_FQFP32 Adapter. 1 x APB110 - MCU_FQFP48 Adapter.
1 x APB111 - MCU_SO28 Adapter. 1 x APA101 - Spare Signal Cable. 1 x APC101 - USB Cable (Standard USB -Type B USB). 1 x APA103 - EEPROM Clamp. 1 x APA107 - E/CU Cable.
1 x APA108 - MCU Cable. 1 x APA109 - MC9S12 Cable. Otherwise an Unpaid Item case will be opened to you.
Please return the item within 30 days after receiving if you are not happy with your purchasing. We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. Business time: GMT8 (9:00-18:00) from Monday to Friday.
This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "autel-online" and is located in this country: US.This item can be shipped to United States.